The CoO-MoO3/γ-Al2O3+MgO catalysts were modified with magnesium oxide and studied by pressurized “as-prepared” evaluation device and XRD, SEM and other analytical testing methods. The results showed that the addition of the appropriate amount of magnesium oxide carrier additive to the γ-Al2O3 carrier is beneficial to improve the adsorption of water vapor and hydrogen sulfide, accelerate the reaction and the adsorption of products on the catalyst surface, and have a significant effect on improving the CO conversion activity of the catalyst, especially the medium temperature conversion activity.
TS-1 with particle size of 1~2 μm was synthesized and modified by MgO to kill a small amount of acid centers on it. The results showed that the TS-1 catalyst modified with MgO could significantly improve the selectivity of propylene oxide (PO) catalyzed by propylene epoxidation and reduce the occurrence of side reactions; under the optimized reaction conditions of CH2O2=1.0 mol/L, θ=60 °C, t=60 min, pC3H6=0.6 MPa, and at the ratio of 80 mL CH3OH per 1 g TS-1 The conversion of H2O2 reached 99.5%, the selectivity of propylene oxide reached 96.7%, and...
Comments